192.168.1.11: Router Admin Login | Default Password
Find out what 192.168.1.11 is used for, how to reach the router login page at this address, and what to do if it does not work on your network.
What Is 192.168.1.11?
192.168.1.11 is a private IPv4 address within the 192.168.1.0/24 subnet. It cannot be reached from the public internet and is typically used inside home or small-office networks. Some router manufacturers use 192.168.1.11 as a default gateway or as part of a multi-router setup where several devices share the same 192.168.1.x range.
On your own network, 192.168.1.11 may be the address of a router, wireless access point, or another device such as a NAS. The only way to know for sure is to check your network configuration and local device list.
Logging into a Router at 192.168.1.11
To access a router or device management interface at 192.168.1.11, your computer or phone must be connected to the same local network. First, verify that your device has an address in the 192.168.1.x range, then open a web browser and type http://192.168.1.11 into the address bar.
If the address belongs to a router, you should see a login prompt. Default usernames and passwords vary by vendor—common combinations include “admin/admin” or “admin/password”—but many new devices require you to set a unique password during initial setup. Always change default credentials to a strong, unique password to prevent unauthorized access.
Troubleshooting When 192.168.1.11 Does Not Work
If the page does not load, it may mean that your router uses a different IP address, that the device at 192.168.1.11 is not a web-managed router, or that your network is using another subnet altogether. Use ipconfig or your network settings to identify your current default gateway, and try that address instead.
You can also scan the local subnet for live hosts using network discovery tools or your router’s own “connected devices” list. If you still cannot reach the admin page, check Ethernet/Wi‑Fi cabling, disable VPNs that might route traffic elsewhere, and consider resetting the router to factory defaults as a last resort (after reading the manufacturer’s instructions).